Had a customer recently send us images of this Dungeons and Dragons Light box and it looks great! Also, we must note that Dungeons and Dragons is the best 4 player side scroller of all time. So much replay value! Thank you to Keith S. for the photos.
Explanation below from the man himself:
“I used one 1X10 inch 8 foot long pine board. And 3/4 inch plywood piece for the back. I cut 3 pieces 2 and 7/8 wide for the sides and the bottom and one piece 2 and 9/16 wide for the top. I put the sides onto the plywood back using glue and pocket holes. Then glued 1/8 thick plywood 3/16 inch from the top to form a “rail” for the glass and marquee to slide on. Then got strips that protruded 1/8 inch wider than the boards to make a frame to go on the top of the box. Drilled a hole in the back and using U shaped nails to hold it down used a string of 5050 led lights to the back although I think 3850 led would probably work to since I used a good a lot of the strand. Slide a piece of glass along between the frame and the top piece I cut 3/16 inch shorter than the other than the sides and the bottom. Then slid the marquee over the glass piece.”
-Keith S.
